Replacing a water heater in a Denver basement or closet means getting the vent, gas connection, relief valve and permit right, along with any high-altitude setup the manufacturer requires. A like-for-like tank swap is usually simple. Changes in size or type take more planning.
Safe checks before you call from Denver
- If you smell gas, leave and call Xcel Energy or 911 from outside.
- If the heater leaks, close the cold supply valve on top.
- Turn a gas heater to pilot or off, or switch off an electric heater's breaker.
- Write down any error code and the model and age from the label.
When to replace
Water from the tank body, rust at the base, rusty hot water, loud rumbling, and a heater past about ten years needing a major part. In finished basements, replacing before a leak saves flooring and drywall.

Sizing and type
Most households use a 40- or 50-gallon tank. Larger households may want more capacity, a tankless unit or a high-efficiency model. ENERGY STAR explains efficiency ratings. New tanks can be larger than old ones of the same capacity, which matters in closets.
Water still running or not sure what to do next? Call.
Call 000 000 0000Venting changes
Gas water heaters that share a chimney with a furnace may need a liner or vent changes when either appliance is replaced, especially when moving to high-efficiency equipment. Power-vent and condensing models use different venting. The provider should check the vent as part of the job.
Permits in Denver and the suburbs
Water heater replacement generally needs a permit. In Denver, many common residential projects go through Quick Permits. Suburbs and Douglas County have their own building departments. Ask the provider to pull the permit and schedule inspection.
What the job includes
Draining and removing the old heater, setting the new one, connecting water, gas or power, installing a relief valve and discharge pipe, checking or replacing the vent connector, adding an expansion tank where needed, leak testing and haul-away. Confirm what's included.
Expansion tanks
Closed systems need an expansion tank, which is often required with replacement.
Water heaters at Denver's altitude
Most Denver-area water heaters are gas tanks in a basement or utility room, often sharing a vent with the furnace. Electric tanks and tankless units are common too, especially in newer homes. At about a mile high, gas appliances need high-altitude setup per the manufacturer, and a burner that's set up wrong can burn poorly, soot up or produce more carbon monoxide. Incoming water is very cold in winter, so heaters work hardest just when you need them most.
Most repairs come down to a failed part: a thermocouple, flame sensor, igniter, gas valve, element, thermostat or relief valve. A tank leaking from its body needs replacing. Replacements and tankless installations generally need a permit, partly because venting and gas connections are safety-critical. Keep carbon monoxide alarms on every level, and if you ever smell gas, leave and call Xcel Energy or 911 from outside.
Who handles what in Denver
Denver Water serves Denver and handles the water main, meter and, in many cases, the curb stop. The City and County of Denver maintains the public sewer mains, while the sewer lateral from the house to the main is generally the owner's responsibility. Xcel Energy handles gas service and gas emergencies. Everything on your side of those connections, including water heater replacement, is work for a plumber you hire.
Good questions to ask about water heater repair in Denver
- Is this heater worth repairing at its age?
- Is it set up correctly for high altitude, and is the vent drawing properly?
- Does the work need a permit, and who arranges the inspection?
- What size and type would you suggest if it needs replacing?
Mistakes to avoid
Avoid relighting a pilot when you smell gas, capping or plugging a dripping relief valve, ignoring soot around the draft hood, and installing a replacement without a permit. Relief valves, venting and gas connections are safety parts, not places to improvise.
Part of water heater repair
Water Heater Replacement is one of the water heater repair services. Others in this group: Tankless Water Heater Repair, Tankless Water Heater Installation, No Hot Water.
Water Heater Replacement in Denver neighborhoods
Calls about water heater replacement come from every part of Denver. Around Denver Union Station, the restored rail hub at the center of LoDo, older homes in Berkeley and Capitol Hill have basements, aging pipes and clay sewer laterals. Near Sloan's Lake, the lake park in west Denver ringed by older homes and new infill, the mix includes condos, converted buildings and newer infill with modern piping. See Denver Union Station. Many plumbing jobs in Denver need a permit, and Denver Quick Permits covers many common residential projects. Verify any plumber's license with the Colorado State Plumbing Board.
Before you call: what to have handy
- Current size, fuel and age
- Location and space around the heater
- Whether it shares a vent with the furnace
- Interest in tankless or high-efficiency
- Your Denver address or nearest cross streets
How does a call about water heater replacement work?
- Call the number on this page and describe what's happening.
- Say what you've already shut off, if anything.
- Give your address or nearest cross streets and ask whether your address is covered. Nothing is promised in advance.
- Ask what a visit involves, how pricing works and whether a permit applies. Prices are set by the provider, not this site.
Around the metro
The same line takes water heater replacement calls from Aurora, Lakewood, Arvada, Westminster, Thornton, Centennial, Littleton, Englewood, Wheat Ridge, Commerce City, Broomfield, Highlands Ranch, Parker, Golden. Coverage for your exact address is confirmed on the call.
